Looking for:
Capture and Apply Windows using a WIM file | Microsoft Docs
Fix: Click Yes to create a catalog file. A directory must contain at least one file. You will need to create an answer file, which contains the settings you want to windows 10 wim image applied at the time you deploy the image to a computer. Main page Downloads Forums Browse source Compression algorithms.
Windows Imaging Format – Wikipedia
This is for remove any personalization and SID. Also all new installs run through OOBE during install. Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. Choose where you want to search below Search Search the Community.
Search the community and support articles Windows Windows 10 Search Community member. Hello, I’m trying to figure out how to create an iso file or wim file of my test machine’s operating system Windows 10 Pro including all the changes I have made to it, so I can import it into MDT.
If anyone has any thoughts please let me know. This thread is locked. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Table of contents Exit focus mode. Table of contents. Important The procedures in this article require a reference image.
Submit and view feedback for This product This page. View all page feedback. In this article.
Windows 10 wim image.Download Windows Imaging File Format (WIM) from Official Microsoft Download Center
The bit version of Microsoft Office Pro Plus is recommended unless you need legacy app support. For more information, see Choose between the bit or bit version of Office. The Office Deployment Tool setup. The file uses an XML format, so the file you create must have an extension of.
For example, you can use the following configuration. You can also use the web-based interface of the Office Customization Tool to help you create your configuration. Ensure the configuration. See the following example of the extracted files plus the configuration. Assuming you’ve named the file “configuration. This command execution will perform the installation of Microsoft Apps for enterprise using the configuration settings in the configuration.
Don’t perform this step yet. Even if you don’t sign in and you close the Sign in to set up Office dialog box, a temporary product key is installed.
You don’t want any kind of product key for Microsoft Apps for enterprise installed as part of your reference image. When you’re creating your reference image, instead of installing Microsoft Apps for enterprise directly from the Office CDN on the internet, you can install Microsoft Apps for enterprise from a location on your local network, such as a file share. That way your new reference image will have a more up-to-date installation of Microsoft Apps for enterprise.
Import the snap-in and create the PSDrive by running the following commands in an elevated PowerShell prompt:. In these steps, we assume that you’ve downloaded the Office Deployment Tool. You might need to modify the path to the source folder to reflect your current environment. In order to build and capture your Windows 10 reference image for deployment using MDT, you ‘ll create a task sequence. The task sequence will reference the operating system and applications that you previously imported into the MDT Build Lab deployment share to build a Windows 10 reference image.
WSUS also allows for an easy process of approving the patches that you’re deploying. The steps below walk you through the process of editing the Windows 10 reference image task sequence to include the actions required to update the reference image with the latest updates from WSUS, install roles and features, and utilities, and install Microsoft Office ProPlus x This is probably the most important step when creating a reference image.
Many applications need the. NET Framework, and we strongly recommend having it available in the image. The one thing that makes this different from other components is that. NET Framework 3.
The goal when creating a reference image is to automate everything. But sometimes you’ve a special configuration or application setup that is too time-consuming to automate. If you add the LTISuspend. In addition to using the LTI Suspend feature for manual configuration or installation, you can also use it simply for verifying a reference image before you allow the task sequence to continue and use Sysprep and capture the virtual machine. When using MDT, you don’t need to edit the Unattend.
However if, for example, you want to configure Internet Explorer behavior, then you can edit the Unattend. Editing the Unattend. These settings are deprecated and can have unintended effects if used.
You also can use the Unattend. Normally we prefer to do this via the Install Roles and Features action, or using Deployment Image Servicing and Management DISM command-line tools, because then we can add that as an application, being dynamic, having conditions, and so forth.
Also, if you’re adding packages via Unattend. Follow these steps to configure Internet Explorer settings in Unattend.
The ADK version has a known issue generating a catalog file for Windows 10, version or X64 install. You might see the error “Could not load file or assembly” in in the console output. To avoid this issue, install the ADK, version or a later version. A workaround is also available for the ADK version Understanding rules is critical to successfully using MDT. Rules are configured using the Rules tab of the deployment share’s properties.
The Rules tab is essentially a shortcut to edit the CustomSettings. This section discusses how to configure the MDT deployment share rules as part of your Windows 10 Enterprise deployment.
You can add almost any rule to either. However, the Bootstrap. For this reason, add only a minimal set of rules to Bootstrap. Put the other rules in CustomSettings. Select the Rules tab and replace the existing content with the following information edit the settings as needed to match your deployment. For security reasons, you normally don’t add the password to the Bootstrap. Obviously if you’re not using the same password pass word3 that is provided in this lab, you must enter your own custom password on the Rules tab and in Bootstrap.
On the Windows PE tab, in the Platform drop-down list, select x In MDT, the x86 boot image can deploy both x86 and x64 operating systems except on computers based on Unified Extensible Firmware Interface.
After the deployment share has been configured, it needs to be updated. This update-process is the one when the Windows PE boot images are created. Now that the MDT Build Lab deployment share the share used to create the reference images has been configured, it’s time to explain the various settings used in the Bootstrap.
The Bootstrap. The basic purpose for Bootstrap. The CustomSettings. The settings, or properties, that are used in the rules CustomSettings. This setting determines the order in which different sections are read.
This Bootstrap. This location is of the deployment share. Normally, this value is set by MDT, but you need to update the DeployRoot value if you move to another server or other share.
If you don’t specify a value, the Windows Deployment Wizard prompts you for a location. These values are used for automatic sign in to the deployment share.
Again, if they aren’t specified, the wizard prompts you. Caution is advised. These values are stored in clear text on the boot image. Even if it’s nice to be welcomed every time we start a deployment, we prefer to skip the initial welcome page of the Windows Deployment Wizard.
All properties beginning with “Skip” control only whether to display that pane in the Windows Deployment Wizard. Most of the panes also require you to actually set one or more values. Has the same function as in Bootstrap. Operating system images are typically the production image used for deployment throughout the organization. This topic shows you how to add a Windows 10 operating system image created with Microsoft Endpoint Configuration Manager, and how to distribute the image to a distribution point.
An existing Configuration Manager infrastructure that is integrated with MDT is used for the following procedures. For more information about the setup for this article, see Prepare for Zero Touch Installation of Windows 10 with Configuration Manager. The procedures in this article require a reference image.
Distribute the operating system image to the CM01 distribution point by right-clicking the Windows 10 Enterprise x64 RTM operating system image and then clicking Distribute Content.
Don’t continue until the distribution is completed it might take a few minutes. Next, see Create an application to deploy with Windows 10 using Configuration Manager. Skip to main content.
Capture and apply an image | Microsoft Docs.
If anyone has any thoughts please let me know. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Pauli O. To create install. Now: Do not boot test machine form HDD!
How satisfied are you with this reply? Creating the customized WIM using the Make it so button. After the customized image is successfully generated, it is recommended to clean up the directory tree under WIM Witch. There, you will not only find the imported install. Each is larger than 4GB; in addition, there is the custom image with a similar size. Want to write for 4sysops?
We are looking for new authors. Read 4sysops without ads and for free by becoming a member! To disable Windows search highlights in corporate environment makes sense because this new Windows feature only distract users Recently, it appears that Chrome and Edge notifications are being hijacked into pushing people onto fake antivirus websites, such Microsoft provides a recommended In this post, I will show Microsoft Deployment Toolkit MDT has long been a popular free deployment solution, allowing organizations to roll out image-based installations Search highlights display a colorful icon in the Windows 10 search bar.
If you hover the mouse over the A comment on the previous post about deploying Chrome extensions posed the question of whether PowerShell could be used The widgets in Windows 11 are essentially the successors of News and interests, known from Windows Like these, At the same time, Microsoft’s operating systems already include a number of fonts. However, if users want to install their own fonts on In this article, you will learn how to use PsExec, a great command line utility from Microsoft’s Sysinternals PsTools Many businesses use Microsoft Intune as part of Endpoint Manager for remote client provisioning, configuration, and management.
However, until Before creating a “golden” image of Windows 10 for deployment purposes, most organizations tweak many of the default configuration Microsoft offers several options if you want to remove installed programs by using the command line or a script Microsoft Power Automate for The administrative templates for Windows 11 are not backward compatible; hence, Windows 10 cannot be fully managed with them The new remote help tool for Intune and Microsoft Endpoint Manager allows you to connect to user devices using Wolfgang, I have removed several apps from the image, but after the installation I got in Start menu just Blue tiles with arrow down, instead of for example XBOX thing that I removed.
When I click the tile, it opens a Store app and in few seconds all tiles are back with their fancy icons, like Netflix, Candy Crush Saga and so on. To give you a specific example — I have removed Microsoft Solitaire Collection app. After image deployment there was that blue icon, when I click it once then I get back Solitare Icon and when I click it again, the app is downloading to the system.
I was playing with the image a bit more and seems that this is standard behavior. The apps are removed from the image, tho the built-in Start Menu layout has no information about it. This affects all newly created user, not the current one. If you want the same menu also for the first admin user, you need to create new account and delete the current one. I was a bit worried about syspreping the image afterwards, as I experienced such case when provisioned xapps were removed, but it seems its not the case with this one!
All working great. A tip for those who want to put the customized image back to ISO for burning or using in VM environment. Hello Donna, excellent tool, however, as youw know, there is a new windows image format “. Thank you Leos, I use powershell o dism commands to convert. It will then extract the WIM automatically to its own working directory, based on which edition you select to work with.
That will be visible in Source WIM tab. I’ve just used this tool to remove a number of Windows Built in Apps from W10 x64 build After deploying the WIM via a task sequence that reported no errors, to a newly created VM — all of the removed built in Apps are all still in the start menu!? Just to clarify — my issue is definitely not just a start menu placeholder issue as others have reported on here — the apps are actually still present on the system, and run if I open them.
I have stepped out from the app removal, as I had bad experience with weird system behavior afterwards. I rather use post deploy script that removes the app for specific user and defines Start menu layout.
Your email address will not be published. Notify me of followup comments via e-mail. You can also subscribe without commenting. Receive new post notifications. Please ask IT administration questions in the forums. Any other messages are welcome. Receive news updates via email from this site.
Toggle navigation. When deploying Windows 10, many administrators do not use the standard image provided by Microsoft; rather, they customize it according to their own requirements. This includes the integration of updates, language files, and drivers. Author Recent Posts.
Wolfgang Sommergut. Wolfgang Sommergut has over 20 years of experience in IT journalism. He has also worked as a system administrator and as a tech consultant. Today he runs the German publication WindowsPro. Latest posts by Wolfgang Sommergut see all. Related Articles.
